This listing is for ONE Light Action Spring for an Akkar or Akkar/Daly 12 gauge Semi Automatic Shotgun chambered for 3 inch shells, but Not for 3 1/2 inch. From an Importer liquidation come these Trap grade, Light Action Springs for an Akkar made Charles Daly model 600 and 601 Semi Automatic shotguns chambered in 12 gauge, for firing Super Light 2 3/4 dram equivalent shells. Manufacturer was Akkar Silah Sanayi Ltd. of Istanbul, Republic of Turkey. Importer was Samco Global Arms, Inc. / SGAI of Miami, the Charles Daly Importer from 2012 until 2015. Production dates ranged from 2007 until 2014. Construction is one piece spring steel. Finish is white stainless. Surface detractions are minimal, principally from bulk storage in, and shipment from, the Samco warehouse in Miami. This part will fit both older model and late model 600 and 601 Akkar and Daly shotguns that will accept 12 gauge, 2 3/4 and 3 inch shells only. Dimensions are 9 3/8 inches Over All Length [compare to 9 1/4 inches for the standard spring]; 1.15 inches outside body diameter, and 1.00 inch internal diameter. Wire thickness is .067 inch [compared to .071 inch on a standard spring.] Schematic number is View 45 in the manual. No other parts are included. These springs will only fit an Akkar model 600 or 601; or an Akkar / Charles Daly model 600 or 601 Semi Automatic shotgun chambered in 12 gauge, and for the purpose of firing super light loads, 2 3/4 drams equivalent of powder charge. They will not fit a 20 gauge Daly, will not fit a 3 1/2 inch chambered Akkar, will Not Fit any Daly Akkar Pump Gun; and will not fit the dump lever of a 1947 John Deere Manure Spreader.We're offering the Akkar Daly 12 gauge Light Action Springs in the photos each for only $8.00.